High Performance XPON 4GE AC Wi-Fi POTS ONU Ideal Choice for Buyers
Overview
● 4GE+AC WIFI+POTS is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access.
● 4GE+AC WIFI+POTS is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT.
● 4GE+AC WIFI+POTS adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China telecommunication CTC3.0 and GPON Standard of ITU-TG.984.X
● 4GE+AC WIFI+POTS with EasyMesh function can easily realize the whole house network.
● 4GE+AC WIFI+POTS is compatible with PON and routing. In routing mode, LAN1 is the WAN uplink interface.
● 4GE+AC WIFI+POTS is designed by Realtek chipset 9607C.
Feature
> Supports GPON and EPON auto detection
> Support Rogue ONT detection
> Support Route mode PPPOE/DHCP/Static IP and Bridge mixed mode
> Support NAT, Firewall function.
> Support Internet, IPTV and VoIP services automatically bound to ONT ports
> Support Virtual server, DMZ, and DDNS, UPNP
> Support Filtering based on MAC/IP/URL
> Support SIP protocol for VoIP Service
> Support 802.11 b/g/n, 802.11ac WIFI(4x4 MIMO) function and Multiple SSID.
> Support Flow & Storm Control , Loop Detection and Port Forwarding.
> Support IPv4/IPv6 dual stack and DS-Lite.
> Support IGMP transparent/snooping/proxy.
> Support TR069 Remote Configuration and maintenance.
> Support EasyMesh function.
> Support PON and routing compatibility function.
> Integrated OAM remote configuration and maintenance function.
> Compatible with popular OLT (HW, ZTE, FiberHome,VSOL...)
Specification
|
Technical Item |
Details |
| PON interface |
1 E/GPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface |
4 x 10/100/1000Mbps auto adaptive Ethernet interfaces Full/Half, RJ45 connector |
| WIFI Interface |
Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400-2.483GHz 5.0GHz Operating frequency: 5.150-5.825GHz Support 4*4MIMO, 5dBi external antenna, rate up to 867Mbps Support: multiple SSID TX power: 11n--22dBm/11ac--24dBm |
| POTS Port |
RJ11 Max 1km distance Balanced Ring, 50V RMS |
| LED |
10 LED, For Status of PWR、LOS、PON、LAN1、LAN2、LAN3、LAN4、2.4G、5.8G、WPS |
| Push-Button |
3 button for Function of Power on/off, Reset, WPS |
| Operating condition |
Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition |
Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply |
DC 12V/1A |
| Power Consumption |
<6W |
| Net Weight |
<0.3kg |
Panel lights and Introduction
|
Pilot Lamp |
Status |
Description |
|
2.4G |
On |
2.4G WIFI up |
|
Blink |
2.4G WIFI is sending or/and receiving data (ACT). |
|
|
Off |
2.4G WIFI down |
|
|
5.8G |
On |
5G WIFI up |
|
Blink |
5G WIFI is sending or/and receiving data (ACT). |
|
|
Off |
5G WIFI down |
|
|
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. |
|
|
LOS |
Blink |
The device doses not receive optical signals or with low signals. |
|
Off |
The device has received optical signal. |
|
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. |
|
|
Off |
The device registration is incorrect. |
|
|
LAN1~LAN4 |
On |
Port (LANx) is connected properly (LINK). |
|
Blink |
Port (LANx) is sending or/and receiving data (ACT). |
|
|
Off |
Port (LANx) connection exception or not connected. |
|
|
FXS |
On |
Telephone has registered to the SIP Server. |
|
Blink |
Telephone has registered and data transmission (ACT). |
|
|
Off |
Telephone registration is incorrect. |
Schematic diagram
● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
● Typical Service：Broadband Internet access, IPV, VOD, video surveillance, etc.
Product Picture
Ordering information
|
Product Name |
Product Model |
Descriptions |
|
XPON 4GE AC WIFI POTS ONU |
CX50140R07C |
4*10/100/1000M RJ45 interface, 1 PON interface, RJ11 interface, support WIFI 5G&2.4G, plastic casing, external power supply adapter |
Internet phone settings
TR069 Settings
TR-069 enables remote and safe configuration of network devices called CPE.Configuration is managed by a central server called an ACS.Device act as a CPE,can be managed by the ACS.
FAQ
Q1. What are the characteristics of Gigabit port*4 dual-band WIFI2.4&5.8G?
A: Gigabit port*4 dual-band WIFI2.4&5.8G supports MESH function, which can realize the communication between wireless MESH and other networks. WIFI adopts 4x4 MIMO technology, the rate of 2.4GHz can reach 300Mbps, and the average rate can reach 160Mbps. WIFI antenna gain up to 18Dbi. In addition, the WIFI5.8GHz rate can reach 866Mbps.
Q2. In addition to dual-band WIFI, what other functions does the device support?
A: In addition to dual-band WIFI, the device also supports Internet, IPTV and VOIP services. It also has the ability to automatically bind ONT ports and supports domain name IP mode.
Q3. What is the warranty period for this product?
A: The warranty period of this product is 1-3 years from the date of product sale.
Q4. Can the software of the device be upgraded?
A: Yes, the software of the device can be upgraded for free for life.
Q5. Can you provide more information about the functionality of MESH?
A: The device's MESH functionality allows wireless MESH to communicate and connect with other networks. This feature enhances connectivity and coverage across the network, ensuring a seamless and reliable wireless experience.
