XPON 4G WIFI POTs USB ONU Manufacturer Companies
Overview
● 4G+WIFI+POTs+USB is designed as HGU (Home Gateway Unit) in transfer data FTTH solutions; the carrier-class FTTH application provides data service access.
● 4G+WIFI+POTs+USB are based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
●4G+WIFI+POTs+USB adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunications EPON CTC3.0.
●4G+WIFI+POTs+USB are compliant with IEEE802.11n STD, adopts with 4x4 MIMO, the highest rate up to 1200Mbps.
● 4G+WIFI+POTs+USB are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
● 4G+WIFI+POTs+USB are designed by Realtek chipset 9607C.
Product Feature and model list
|
ONU Model |
CX51141R07C |
CX51041R07C |
CX50141R07C |
CX50041R07C |
|
Feature |
4G CATV VOIP 2.4/5GWIFI USB |
4G CATV 2.4/5GWIFI USB |
4G VOIP 2.4/5GWIFI USB |
4G 2.4/5GWIFI USB |
Feature
> Supports Dual Mode (can access GPON/EPON OLT).
> Supports GPON G.984/G.988 standards and IEEE802.3ah.
> Support SIP Protocol for VoIP Service
> Integrated line testing compliant with GR-909 on POTS
> Support 802.11 b/g/n, 802.11ac WIFI(4x4 MIMO) function and Multiple SSID
> Support NAT, Firewall function.
> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
> Support port mode of VLAN configuration
> Support LAN IP and DHCP Server configuration
> Support TR069 Remote Configuration and WEB Management
> Support Route PPPOE/IPOE/DHCP/Static IP and Bridge mixed mode
> Support IPv4/IPv6 dual stack
> Support IGMP transparent/snooping/proxy
> In compliant with IEEE802.3ah standard
> Compatible with popular OLT(HW, ZTE, FiberHome,VSOL...)
Specification
|
Technical Item |
Details |
| PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface |
4 x 10/100/1000Mbps auto adaptive Ethernet interfaces Full/Half, RJ45 connector |
| USB Interface |
standard USB2.0 |
| WIFI Interface |
Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400-2.483GHz 5.0GHz Operating frequency: 5.150-5.825GHz Support 4*4MIMO, 5dBi external antenna, rate up to 867Mbps Support: multiple SSID TX power: 11n--22dBm/11ac--24dBm |
| POTS Port |
RJ11 Max 1km distance Balanced Ring, 50V RMS |
| LED |
11 LED, PWR, LOS,PON, LAN1~LAN4, 5G,2.4G,, FXS |
| Push-Button |
4, for Function of Power on/off, Reset, WPS, WIFI |
| Operating condition |
Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition |
Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply |
DC 12V/1A |
| Power Consumption |
<6W |
| Net Weight |
<0.4kg |
Panel lights and Introduction
|
Pilot Lamp |
Status |
Description |
|
WIFI |
On |
The WIFI interface is up. |
|
Blink |
The WIFI interface is sending or/and receiving data (ACT). |
|
|
Off |
The WIFI interface is down. |
|
|
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
|
Off |
The WIFI interface does not establish a secure connection. |
|
|
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. |
|
|
LOS |
Blink |
The device doses not receive optical signals or with low signals. |
|
Off |
The device has received optical signal. |
|
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. |
|
|
Off |
The device registration is incorrect. |
|
|
LAN1~LAN4 |
On |
Port (LANx) is connected properly (LINK). |
|
Blink |
Port (LANx) is sending or/and receiving data (ACT). |
|
|
Off |
Port (LANx) connection exception or not connected. |
|
|
FXS |
On |
Telephone has registered to the SIP Server. |
|
Blink |
Telephone has registered and data transmission (ACT). |
|
|
Off |
Telephone registration is incorrect. |
Schematic diagram
● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
● Typical Service：Broadband Internet access, IPTV, VOD, video surveillance, VoIP etc.
Product Picture
Ordering information
|
Product Name |
Product Model |
Descriptions |
|
XPON 4GE AC WIFI POTS USB ONU |
CX50141R07C |
4*10/100/1000M, 1 PON interface, RJ11 interface，USB interface , built-in FWDM, 1 RF interface, support WIFI 5G&2.4G, plastic casing, external power supply adapter |
After working for some time to stop working?
（1） Power supply is not working properly.
（2） The equipment from overheating.
FAQ
Q1. Is XPON ONU compatible with EPON and GPON modes?
A: Yes, XPON ONU is compatible with EPON and GPON modes.
Q2. What is the transmission speed of EPON and GPON on XPON ONU?
A: The uplink and downlink transmission speed of EPON on XPON ONU is 1.25Gb/s. For GPON, the upstream transmission speed is 2.5Gb/s, and the downstream serial transmission speed is also 2.5Gb/s.
Q3. How many gigabit ports does XPON ONU have?
A: XPON ONU has 4 gigabit ports.
Q4. Does XPON ONU support dual-band WIFI?
A: Yes, XPON ONU supports dual-band WIFI, the frequency is 2.4GHz and 5.8GHz.
Q5. What is the maximum network speed of each WIFI frequency band on XPON ONU?
A: For the 2.4GHz frequency band, the maximum speed can reach 300Mbps. For the 5.8GHz band, the maximum speed can reach 866Mbps.
