XPON 4GE AC WIFI ONU Supplier Wholesaler
Overview
● 4GE+AC WIFI is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access.
● 4GE+AC WIFI is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT.
● 4GE+AC WIFI adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China telecommunication CTC3.0 and GPON Standard of ITU-TG.984.X
● 4GE+AC WIFI with EasyMesh function can easily realize the whole house network.
● 4GE+AC WIFI is compatible with PON and routing. In routing mode, LAN1 is the WAN uplink interface.
● 4GE+AC WIFI is designed by Realtek chipset 9607C.
Feature
> Supports GPON and EPON auto detection.
> Support Rogue ONT detection.
> Support Route mode PPPOE/DHCP/Static IP and Bridge mixed mode.
> Support NAT, Firewall function.
> Support Internet, IPTV services automatically bound to ONT ports.
> Support Virtual server, DMZ, and DDNS, UPNP.
> Support Filtering based on MAC/IP/URL.
> Support 802.11 b/g/n, 802.11ac WIFI(4x4 MIMO) function and Multiple SSID.
> Support Flow & Storm Control , Loop Detection and Port Forwarding.
> Support IPv4/IPv6 dual stack and DS-Lite.
> Support IGMP transparent/snooping/proxy.
> Support TR069 Remote Configuration and maintenance.
> Support EasyMesh function.
> Support PON and routing compatibility function.
> Integrated OAM remote configuration and maintenance function.
> Compatible with popular OLT (HW, ZTE, FiberHome,VSOL...)
Specification
|
Technical Item |
Details |
|
PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
|
LAN interface |
4 x 10/100/1000Mbps auto adaptive Ethernet interfaces Full/Half, RJ45 connector |
|
WIFI Interface |
Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400-2.483GHz 5.0GHz Operating frequency: 5.150-5.825GHz Support 4*4MIMO, 5dBi external antenna, rate up to 867Mbps Support: multiple SSID TX power: 11n--22dBm/11ac--24dBm |
|
LED |
9 LED, For Status of PWR、LOS、PON、LAN1、LAN2、LAN3、LAN4、2.4G、5.8G |
|
Push-Button |
3 button for Function of Power on/off, Reset, WPS |
|
Operating condition |
Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
|
Storing Condition |
Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
|
Power supply |
DC 12V/1A |
|
Power Consumption |
<6W |
|
Net Weight |
<0.3kg |
Panel lights and Introduction
|
PilotLamp |
Status |
Description |
|
2.4G |
On |
2.4G WIFI up |
|
Blink |
2.4G WIFI is sending or/and receiving data (ACT). |
|
|
Off |
2.4G WIFI down |
|
|
5.8G |
On |
5G WIFI up |
|
Blink |
5G WIFI is sending or/and receiving data (ACT). |
|
|
Off |
5G WIFI down |
|
|
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. |
|
|
LOS |
Blink |
The device doses not receive optical signals or with low signals. |
|
Off |
The device has received optical signal. |
|
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. |
|
|
Off |
The device registration is incorrect. |
|
|
LAN1~LAN4 |
On |
Port (LANx) is connected properly (LINK). |
|
Blink |
Port (LANx) is sending or/and receiving data (ACT). |
|
|
Off |
Port (LANx) connection exception or not connected. |
Schematic diagram
● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
● Typical Service：Broadband Internet access, IPV.
Product Picture
Ordering information
|
Product Name |
Product Model |
Descriptions |
|
XPON 4GE AC WIFI ONU |
CX50040R07C |
4*10/100/1000M RJ45interface, 1 PON interface, support WIFI 5G&2.4G, plastic casing, external power supply adapter |
Wireless LAN
Let's find out where we configure the IPOE/PPPOE Internet access function!
VLAN 100 is used for the Internet, and DHCP automatically assigns IP addresses
1.register ONT to OLT, Please contact your ISP. You can check the register status Indicators on the front panel.
2. Login to ONT,create a WAN connection with VLAN ID 100, Channel Mode is IPoE, Connection Type is Internet .
FAQ
Q1: What are the characteristics of XPON ONU?
A1: XPON ONU has 4 Gigabit ports, dual-band WIFI2.4&5.8GHz, and complies with 802.11b/g/n and 802.11ac specifications. WIFI adopts 4×4 MIMO.
Q2: What is the network speed supported by WIFI of XPON ONU?
A2: The WIFI2.4 network speed of XPON ONU reaches 300Mbps, and the average network speed is 160Mbps. The WIFI5.8 network rate is 866Mbps.
Q3: Does XPON ONU support different working modes?
A3: Yes, XPON ONU can switch between HGU (routing mode) or SFU (bridge mode) mode.
Q4: Which network protocols does XPON ONU support?
A4: XPON ONU supports IPV4/IPV6 dual stack and DS-Lite protocol. It also supports the Telnet protocol.
Q5: What additional functions does XPON ONU provide?
A5: XPON ONU supports automatic binding of ONT ports for Internet and IPTV services.
